Instructions

Instructions for use

It is important to note that when the toaster is placed on a gas flame the mesh side must be at the top and the smooth concave size at the bottom, i.e. the side that touches the gas flame.

The toaster must only be used on LP gas, preferably on medium flame, and at no stage on open fires or HP gas.

The toaster must not be handled when hot as the metal plate (toaster) retains its heat and could cause serious burns if handled. It is recommended that you use tongs to handle the toaster, as well as when turning the toast or removing the toaster from the flame to cool down.

For the best results for even toasting, place the toaster on a medium LP gas flame and allow to heat up for at least 1 minute. Place desired bread on toasting surface. Monitor carefully as it could take as little as 30 seconds per side to toast. When one side has been toasted, turn bread with tongs to toast the other side. Note: Brown bread could take longer to toast.

When used as a heat spreader, place cooking utensil, e.g. pot on the toasting surface. If pot is too large then let is project both sides. It has been scientifically proved that it is more economical to use a heat spreader than cooking on a direct flame, as the pot cooking surface heats up evenly.

The Kulu gas toaster can also be used for warming pies etc. by wrapping pie in tin foil and warming each side for approximately 5 minutes.

 

Product care

When the toaster has cooled down and cold, brush out mesh with a stiff nylon brush and wash if necessary.

Please note that the smooth side of the toaster should always be concave. If not, place mesh side down on smooth surface, and with foot apply downward pressure to restore indentation.

 

LP gas safety tips